Shift Cable: Service and Repair

Removing and installing selector lever cable
Tools






Preliminary work for selector lever cable

1. Move selector lever to position.
2. Remove selector frame.


Removing selector lever cable





Shield to left of transmission

Note: When a new selector lever cable is used, this should be connected directly to the old cable when it is removed. This ensures that it is routed correctly.

1. Remove shield on the transmission. To do this, unscrew three fastening screws -arrow-.





connection to transmission

2. Remove tab washer -A- on the cable. Selector lever cable.





Removing selector lever cable on transmission

3. Unscrew selector lever cable from the ball joint with universal disassembly tool NR.21.

4. Pull selector lever cable up and out through the lower part of the selector frame.

Removing selector lever cable





Note: When a new selector lever cable is used, this should be connected to the old cable immediately during removal. This ensures that it is routed correctly.

1. Remove tab washer -A- on the cable. Connecting selector lever cable to transmission





Removal of selector lever cable from transmission

2. Unscrew selector lever cable from the ball head with disassembly tool, universal NR.21.

3. Pull selector lever cable up and out through selector frame lower part.

Installing selector lever cable
Removing and installing cable adjustment

Note: When a new selector support is used, the cable adjustment of the selector cable must be modified.





Removing the cable adjustment

1. Remove pins -direction of arrow- and take out cable adjustment.





Installing the cable adjustment

2. Insert cable adjustment on the new selector support and install pins -direction of arrow-.





3. When doing so, ensure that the opening for the adjusting screw -arrow- is turned upwards. Cable adjustment

Installing selector lever cable

Note: When a new selector lever cable is used, this should be connected to the old cable immediately during removal. This ensures that it is routed correctly.

Note: The cable adjustment must be changed when a new selector lever cable is used.

1. Install selector lever cable through the lower part of the selector frame.
2. Press rubber sleeve on the selector lever cable into the lower part of the selector frame.

Note: Ensure that the tab washer is seated correctly.





3. Attach tab washer -A- to the cable holder on the transmission side. Selector lever cable connection to transmission





Selector lever cable connection to transmission

4. Attach cable to the ball joint -arrow-.





Shield to left of transmission

5. Install shield on the transmission. To do this, screw in three fastening screws -arrow-.

Installing selector lever cable

Note: When a new selector lever cable is used, this should be connected to the old cable immediately during removal. This ensures that it is routed correctly.

Note: The cable adjustment must be changed when a new selector lever cable is used.

1. Install selector lever cable through selector frame lower part.
2. Press rubber sleeve on the selector lever cable selector frame lower part.





Note: Ensure that the tab washer is seated correctly.

3. Attach tab washer -A- to cable holder on transmission side. Connecting selector lever cable to transmission





Connecting selector lever cable to transmission

4. Connect cable to ball head -arrow-.

Subsequent work for selector lever cable
Reworking selector lever cable
1. Install selector frame.