Checking and topping up oil for four-wheel final drive
Checking and topping up oil for four-wheel final driveTools
Preliminary work for oil for four-wheel final drive
1. Remove engine guard .
Checking oil for four-wheel final drive
Oil inspection plug-filler screw
WARNING: Risk of scalding from hot oil
-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)
Note: Vehicle must be horizontal to check oil level in all-wheel final drive.
1. Unscrew oil inspection plug -A- with tool special inserts mod. AB170.
2. The oil level is correct if the oil reaches the lower edge of the inspection window.
3. If this is not the case, top up the oil.
Tightening to the specified torque
4. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. Tightening torque 26 ft. lbs.
Topping up oil for four-wheel final drive
Filling oil for all-wheel final drive
Oil inspection plug-filler screw
WARNING: Risk of scalding from hot oil
-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)
Note: Vehicle must be horizontal in order to fill final drive.
1. Unscrew oil inspection plug -A- with tool special inserts mod. AB170.
Note: Use only oil approved by Porsche.
2. Fill with oil using the ATF filling device for filling transmission 161 to the lower edge of inspection plug -A-.
Tightening to the specified torque
3. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. Tightening torque 26 ft. lbs.
Subsequent work for oil for four-wheel final drive
Touch up for oil for all-wheel final drive
1. Remove engine guard.