Removing and Installing Selector Knob

Removing and installing selector knob

Removing selector knob





Overview of selector knob
1. Selector lever in position D.





Note: The button -inset- at the front must not be pressed down when the selector knob is pulled.

Removing selector knob





2. Pull selector lever up and off. Removing selector knob


Installing selector knob





Overview of selector knob
1. Selector lever in position D.





ATTENTION: Overstretch the spring in selector knob.
-> Unlocking button does not return to the initial position.
-> Only move the selector knob as far forward until the tool can be inserted. Avoid any further overstretching.

2. The unlocking hook in the selector knob must retract to the -Hebel grau-. Lock the hook under the button, using short screwdriver -A- for example. Section of selector knob





Note: The button must not be pressed down when the selector knob is installed.

3. Push on the selector knob until it audibly engages in the selector support. The sleeve is then inserted in the selector lever cover. Pushing off selector knob
4. Remove the tool on the handle.
5. Functional test of gear selecting system:
^ Will the vehicle start?
^ Do all the selector lever positions work?