Removing and Installing Sealing Ring For Right-Hand Halfshaft Flange

Removing and installing sealing ring for right-hand halfshaft flange





Tools

Preliminary work

1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panel.
3. Remove right halfshaft flange.

Removing sealing ring for halfshaft flange






1. Lever the sealing ring out of the transmission.

Installing sealing ring for halfshaft flange






1. Screw M10 x 30 hexagon-head bolt into side A of Pressure piece 9734.





2. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side B of pressure piece 9734'.





3. Hammer the sealing ring along with pressure piece 9734 completely into the transmission by hitting the hexagon-head bolt.

Subsequent work

1. Install the right halfshaft flange.
2. Check transmission oil level.
3. Fit the underbody panel.
4. Lower the vehicle.