Removing and Installing Shift Console

Removing and installing shift console

Tools





Preliminary work

1. Remove shift-lever knob.
2. Remove centre console.

Removing shift console

Removing gearshift bracket





1. Locking bridge P 9619/1 must be fitted on the gearshift bracket.





2. Open bayonet locks on the pre-selector and shifting connections.





3. Disengage adjustment pin on pre-selector and shifting connections.





4. Unclip supports on the gearshift bracket.





5. Unscrew nut and lift gearshift bracket up and off.





6. Remove locking bridge.

Installing shift console

Installing gearshift bracket





1. Fit gearshift bracket and screw in nuts.








2. Locking bridge P 9619/1 must be fitted on the gearshift bracket.





3. Clip in supports on the gearshift bracket. The support with the blue hinged tube must be fitted on the left and the support with the black hinged tube must be fitted on the right.





Note: Before starting to install the gearshift bracket, ensure that the transmission is in neutral.

4. Engage adjustment pin on pre-selector and shift connections.





5. Close bayonet locks on the pre-selector and shift connections.





6. Locking bridge 9619 must be removed.

Subsequent work

1. Install centre console.
2. Install shift-lever knob.