Front Bumper Reinforcement: Service and Repair

631019 Removing And Installing Front Bumper

Preliminary work
Remove the front apron.

Removing front bumper

Overview, front bumper:

Removing the front bumper:

1. Unscrew fastening screws -1- and remove bumper -2-.

Installing the front bumper

1. Position bumper -2-.

Installing the front bumper:

2. Screw in fastening screws -1- and tighten to the specified tightening torque. Tightening torque 85 Nm (63 ftlb).

Subsequent work

Reworking
Install the front apron.