Removing and Installing Switch Console

Removing And Installing Switch Console

Preliminary work
1. Remove the left and right cover on the center console.
2. Move gearshift lever to the rear position.
3. Switch off ignition and remove ignition key.

Removing switch console

INFORMATION: The switch console is clipped into the center console.












1. Press in the side retaining bars on the switch console at the left and right using a screwdriver -1- and pull switch console out of its installation slot.







2. Release electric connectors and pull them off the switch console. The number of connectors can vary, depending on equipment.

Installing switch console
1. Push electric connectors onto the switch console until the connectors engage securely. The number of connectors can vary, depending on equipment.







2. Slide the switch console into the center console until the switch console engages securely.

Subsequent work
1. Install the left and right cover on the center console.