Exposing Main Wire Harness In Passenger Compartment

Exposing Main Wire Harness In Passenger Compartment

1. Loosen seat belt mount at left and right.
1.1. Press off cap -1- with a screwdriver and unscrew the fastening screw -2-. Remove seat belt with fitting -3- and spacer sleeve -4-.







2. Disengage floor covering at the support and lay it in the vehicle interior.
3. Remove left and right support.
3.1. Unlock locating peg -1- of the support using the commercially available removal tool Disassembly tool, universal NR.21.







3.2. Unscrew fastening screws -2- and nuts -3- and carefully pull the support up and out of the retaining points.