Removing and Installing Wiring Harness For Centre Console

Removing And Installing Wiring Harness For Centre Console

Preliminary work

Preliminary work for interior monitoring sensor
Remove center console.

Removing wiring harness for center console







1. Release electric connectors for the equipment versions (e.g. cigarette lighter, interior sensor etc. -A- and unplug.







2. Disengage retaining clips with wiring harness on center console and remove the harness.

Installing wiring harness for center console

INFORMATION:
- The wire harness for center console spare parts scope means the scope for fully-equipped vehicles. Depending on the vehicle equipment, connectors not required are tied to the wire harness for center console using tie-wraps.
- When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.







1. Lay wiring harness with retaining clips in center console and push on retaining clips at the points provided.
2. Push electric connectors onto equipment versions until they are felt to engage.

Subsequent work

Subsequent work for interior monitoring sensor
Install center console.