Removing and Installing Bulb For Rear Light

Removing And Installing Bulb For Rear Light

Preliminary work
1. Remove rear light

Removing bulb for rear light

















1. Open the bulb holders with the bayonet lock -Arrow A- and take them out of the rear light -Arrow B-.







2. Press the bulbs into the bulb holders -Arrow A-, turn them anti-clockwise -Arrow B- and take them out of the bulb holders -Arrow C-.

Installing bulb for rear light

INFORMATION: All three bulbs are two-filament bulbs with offset locking pins. Always insert the bulb at the correct position in the bulb holder.







1. Press the bulbs into the bulb holder -Arrow A- and turn them -Arrow B- until the bulbs engage securely in the bulb holders.







2. Insert the bulb holders with the bulbs into the rear light -Arrow A- and lock them -Arrow B-.

Subsequent work
Install rear light.