Preliminary Work For Removing Engine

Preliminary work for removing engine

Preliminary work

Danger: Vehicle raised incorrectly.
^ Danger of fatal injury or material damage should the vehicle fall down.

-> Raise the vehicle at the prescribed jacking points.

Note: Take care to maintain access to the screws for the diagonal struts in the vicinity of the rear jacking points.

1. Raise the vehicle at the prescribed jacking points.
2. Use the PIWIS Tester to read out the fault memory.
3. Place protective covers on the body to avoid damage.
4. Disconnect the battery and cover the battery or contacts.
5. Remove both rear wheels. Use the specified special tool socket-wrench insert 300 to avoid damage to the wheel rims.
6. Remove rear apron.
7. Removing side retaining frames (heat protection) at the left and right.
8. Undo support securing rear apron to body -2-. Turn the support towards the brake disc.





9. Remove cover for rear and center underbody.