Disassembling and Assembling Sun Visor

682337 Disassembling And Assembling Sun Visor

Preliminary work
Remove sun visor.

Disassembling sun visor

Removing mirror insert
1. Insert a narrow screwdriver between the mirror insert -3- and mirror housing -2- at the bottom centre, and unclip the mirror insert.

Unclipping Mirror Insert:

2. Pull the mirror insert -3- upwards and remove from the mirror housing -2-.

Removing Mirror Insert:

Removing bulb and contact clips
1. Remove bulb -5- from contact clips -4-. Take the contact clips upwards out of the holder.

Removing Bulb And Contact Clips:

Removing mirror housing
1. Insert a narrow plastic spatula between the mirror housing -2- and the sun visor -1- on the left and right and unclip the mirror housing.

Unclipping Mirror Housing:

2. Take the electric lead out of the mirror housing -2- and detach the mirror housing from the sun visor.

Removing Mirror Housing:

Assembling sun visor

Installing mirror housing
1. Insert electric lead into the mirror housing -2-. Position the mirror housing in the sun visor.

Positioning The Mirror Housing:

2. Press the mirror housing -2- at all four corners until it locks into place.

Press In Mirror Housing:

Inserting contact clips and bulb
1. Position the contact clips -4- in the mirror housing and fit under the lug. Insert bulb -5-.

Inserting Contact Clips And Bulb:

Installing mirror insert
1. Position the lugs on the right and left of the mirror insert -3- in the mirror housing.

Positioning Mirror Insert:

2. Clip the mirror insert -3- into the mirror housing -2- on the left, right and in the middle.

Clipping In Mirror Insert:

Subsequent work
Install sun visor.