S7.1 - Phase III B - Spot Painting on Flat Surface

7.1 Phase III B - Spot Painting On Flat Surface

S 7.1.1 Procedure using Standox(R) Basecoat

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

Step 1

Step 2

Step 3

S 7.1.2 Procedure using Standohyd(R) Basecoat

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

S 7.1.2.1 Spot painting with light metallic color shades

Step 1: Apply Standohyd(R) Basecoat

Step 2: Touch up transition areas

S 7.1.2.2 Spot painting with dark metallic color shades

Step 1: Pre-spray Standohyd(R) Basecoat transparent MIX 399

Step 2: Apply Standohyd(R) Basecoat

Step 3: Apply clear lacquer

S7.2 - Phase III C - Spot Painting Into Neighboring Section