Removing and Installing Hinge For Top Box Cover

Removing and installing hinge for top box cover

Tools







Technical values







Removing hinge for top box cover







1. Press lock 1 out of the push rod spring 2 at the left and right. Assembly tool for Springfix System pin circlips NR.131.
2. Unscrew fastening nuts 3 from the hinge for top box cover 4.







Removing guide rail







1. Unscrew fastening screws 5 on the guide rail 6.







Installing hinge for top box cover

Installing guide rail

1. Pull protective film off the guide rail 6, position on inner side section and secure with the fastening screws 5. Tightening torque: 7.2 ftlb.







2. Bend tabs arrows around the joint flange.







Installing hinge for top box cover

1. Position hinge for top box cover 4 on the body and secure with the fastening nuts 3. Tightening torque: 7.2 ftlb.







2. Fit lock 1 into the push rod spring 2 at the left and right. Assembly tool for Springfix System pin circlips NR.131.