Convertible Top Hinge: Service and Repair

619200 Removing And Installing Hinge For Top Box Cover

Tools







Removing hinge for top box cover

Installing Convertible Top Compartment Lid:

1. Press lock -1- out of the push rod spring -2- at the left and right. Assembly tool for Springfix System pin circlips NR.131
2. Unscrew fastening nuts -3- from the hinge for top box cover -4-.

Removing Hinge For Top Box Cover:

Removing Guide Rail

Installation Position Of Guide Rail:

1. Unscrew fastening screws -5- on the guide rail 6.

Removing Guide Rail:

Installing hinge for top box cover

Installing guide rail
1. Pull protective film off the guide rail 6, position on inner side section and secure with the fastening screws -5-. Tightening torque 7.2 ftlb.

Securing Guide Rail:

2. Bend tabs arrows around the joint flange.

Bending Tabs:

Installing hinge for top box cover
1. Position hinge for top box cover -4- on the body and secure with the fastening nuts 3. Tightening torque 7.2 ftlb.

Installing Hinge For Top Box Cover:

2. Fit lock -1- into the push rod spring -2- at the left and right. Assembly tool for Springfix System pin circlips NR.131