Procedures

617019 Removing And Installing Motor For Drive Mechanism

Preliminary work
Move convertible top to service position.

Removing motor for drive mechanism

Installation Position Of Motor For Convertible Top Operation:

1. Release -arrows a- and remove connector.
2. Loosen lock washers -1- and lift up and out -arrows A-.
3. Remove pliable shafts -2- from the motor for convertible top operation and lay them aside -arrows B-.
4. Loosen the three fastening nuts -3- and remove motor for convertible top operation by pulling it forwards -arrow C-.

Installing motor for drive mechanism
1. Insert motor for convertible top operation into the studs -arrow A-.
2. Secure motor for convertible top operation with the three fastening nuts -1-. Tightening torque 3.5 ftlb.
3. Adjust convertible top gear.
4. Insert pliable shafts -2- into the motor for convertible top operation -arrows B- and secure with lock washers -3- (-arrows C-).
5. Push connector onto motor for convertible top operation until it clicks into place.

Subsequent work
Move convertible top out of service position.