Removing and Installing Sealing Ring For Short Halfshaft Flange

WM 392219 Removing and installing sealing ring for short halfshaft flange





Preliminary work

Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Remove short halfshaft flange.

Removing sealing ring

Removing sealing ring
1. Remove sealing ring with hook VW 681.





Removing sealing ring

Installing sealing ring

Installing sealing ring
1. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on pressure piece 3382.
2. Drive in sealing ring with pressure piece 3382.





Tapping in sealing ring

Subsequent work

Subsequent work
1. Install short halfshaft flange.
2. Check oil for final drive and top up if necessary.
3. Fit support plate.
4. Lower the vehicle.