Washer Fluid Level Switch: Service and Repair

Removing And Installing Fluid Level Sensor

Preliminary work
1. Remove front right wheel.
2. Remove front right wheel housing liner.

Removing fluid level sensor







1. Release -arrow A- and pull off -arrow B- plug.







2. Lever sensor out of rubber seal -arrow B-. Collect any emerging fluid with a suitable container.







3. Remove rubber seal -arrow-.







Installing fluid level indicator

1. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press rubber seal into tank -arrow B- until it is felt to engage.







2. Apply a suitable rubber lubricant (tyre mounting paste) to sealing surface -arrows A- and press sensor into rubber seal -arrow B-until it is felt to engage.







3. Connect plug to sensor -arrow A- until the lock -arrow B- is felt to engage.







Subsequent work
1. Install front right wheel housing liner.
2. Fit front right wheel.