P0208

P0208

Injection Valve On Cylinder 8 - Open Circuit

Diagnostic conditions
- Engine running
- Battery positive voltage greater than 8 V

Possible cause of fault
- Open circuit in injection valve's control line
- Open circuit in voltage supply between injection valve and fuse
- Fuse F8 in fuse carrier in radiator tank E-box faulty
- Injection valve on cylinder 8 faulty
- DME control module faulty

Affected terminals
DME control module plug A, pin 19, and pin 2 of injection valve

Diagnosis/troubleshooting

NOTE: Connection KE 7 is located on the bottom of the radiator tank E-box.