Security Lamp/Indicator: Service and Repair

Removing And Installing Light-emitting Diode For Alarm System

Preliminary work
Remove door trim panel.

Removing light-emitting diode for alarm system







1. Release light-emitting diode -Arrows A- and pull it down and off -Arrow B-.







2. Release -Arrow A- and pull off -Arrow B- plug.







Installing light-emitting diode for alarm system
1. Plug in the light-emitting diode connector -Arrow A- until the locking tab -Arrow B- is felt to engage.







2. Press light-emitting diode into the housing -Arrow A- until the locking tabs are felt to engage -Arrows B-.







Subsequent work
Install door trim panel.