CD Changer: Service and Repair

Removing And Installing CD Changer

Preliminary work

NOTE:
- The CD changer is located behind the right rear side-panel lining.
- Remove the side-panel lining at rear right.

Removing CD changer

WARNING:
Risk of damage to audio system components
- Remove the ignition key and switch off the audio system.
- Observe the requirements for working with optical waveguides.

1. Unscrew the four fastening screws and pull out the carrier with CD changer and amplifier.







2. Undo the six fastening screws, lift out the CD changer and pull forwards.







3. Actuate detent -Arrow 1--Arrow a- and disconnect plug.







4. Unplug connector -Arrow 2-.

Installing CD changer
1. Position CD changer in the carrier and screw it down with the six fastening screws. Tightening torque: 4.5 ftlb.







2. Screw down the carrier with CD changer & amplifier. Tightening torque: 6.5 ftlb.







3. Insert plug -2- until it is felt to engage.







4. Insert optical waveguide plug -1- until it is felt to engage.

Subsequent work
Install the side-panel lining at rear right.