Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Removing and installing guide for oil dipstick

Preliminary work





1. Remove throttle body cover. Pull the cover up and off.
2. Remove Y-shaped pipe.

Removing and installing guide for oil dipstick





1. Loosen the 2 fastening screws.





2. Pull out oil dipstick.
3. Pull guide tube out of oil pan.
4. Replace O-ring.
5. Insert guide tube into oil pan.
6. Tighten the 2 fastening screws. First position the two screws. Then tighten the upper fastening screw. Tightening torque: 7.5 ft-lb. and then the lower fastening screw Tightening torque: 7.5 ft-lb.

Subsequent work

1. Reinstall the Y pipe.





2. Reinstall throttle body cover. To do this, press the 4 rubber elements on the ball heads.