Condenser Fan: Service and Repair

Removing And Installing Fan For Condenser

Preliminary work
Remove radiator frame.

Removing fan for condenser

NOTE:
- The big fan is for the engine cooling, the small fan is for the air conditioning.
- The sheetmetal clips on the fans are for balancing the fans and must not be pulled off.







1. Unclip the electric plug on the radiator frame.







2. Undo the 3 fastening screws on fan and pull fan down and out.







3. Follow up the fan cable and fan control module during removal.







Installing fan for condenser
1. Push fan cable with control module from underneath through the radiator frame.







2. Tighten the three fastening screws. Tightening torque: 3 ftlb.







3. Route cables correctly and clip electric plug into the frame at the top.







Subsequent work
Install radiator frame.