Removing and Installing Bulb For Floor Light

Removing And Installing Bulb For Floor Light

Bulb table







Removing bulb for floor light
1. Switch off ignition and remove ignition key.
2. Use a plastic spatula or screwdriver to lever out the light.












3. Pull out light, press connector together -arrows a- and remove it.







4. Use a screwdriver to carefully lever off the sheetmetal cover from the four locking elements.







5. Pull bulb out of holder.







Installing bulb for floor light
1. Insert bulb into holder.







2. Position sheetmetal cover and press into place. Ensure that all four locking elements engage properly and the sheetmetal cover is not deformed.







3. Push in connector until it is felt to engage.







4. Insert light into the opening and press into place. Ensure light is fitted properly.