Fog/Driving Lamp Bulb: Service and Repair

Removing And Installing Bulb For Fog Light

Preliminary work
Partially disassemble front wheel housing liner.

Removing bulb for fog light

WARNING:
Risk of short circuit.
- Before removing bulb, remove ignition key and switch off light switch.

1. For turbo engines, the relevant air grill and cover over the fog light must first be unclipped. To do this, grasp the air grill and unclip both upper tabs of the air grill. Then unclip cover.
2. Pull off electrical plug.
3. Turn bulb in -direction of arrow- - bayonet lock.







4. Remove bulb.







Installing bulb for fog light
1. Install new or tested bulb, paying attention to installation position.







2. Turn bulb -direction of arrow- - bayonet lock.







3. Push in plug until it is felt to engage.
4. For turbo engines, the relevant cover over the fog light and the air grill must be clipped in again. Clip in cover. Then position air grill and clip in both upper tabs to the front spoiler.

Subsequent work
Partially assemble front wheel housing liner.