Cabin Temperature Sensor / Switch: Service and Repair

Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater

Information

NOTE:
- Vehicles with manual air conditioner only have the evaporator temperature sensor -1- installed.
- Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.







Preliminary work

Preliminary work - evaporator temperature sensor
Remove glove compartment.

Preliminary work - intake air temperature sensor
Remove the cover from under the right dashboard.

Preliminary work for centre temperature sensor/side vents right side
Remove glove compartment.

Preliminary work for centre temperature sensor/side vents left side
Removing servomotor for air conditioner.

Preliminary work for temperature sensor for footwell outlet vent, left side
Remove servomotor.

Preliminary work for temperature sensor for footwell outlet vent, right side
Remove glove compartment.

Removing temperature sensors/interior temperature sensors on heater

Removing the evaporator temperature sensor
1. Turn temperature sensor -1- 90 degrees and remove from the heating/air-conditioning unit.
2. Press latch on the electric connector for the sensor -1--arrows a- and pull off the connector.







Removing the intake air temperature sensor
1. Turn temperature sensor -2- 90 degrees and remove from the heater/air-conditioning unit.
2. Press latch on the electric connector for the sensor -2--arrows a- and pull off the connector.







Removing the centre temperature sensor/side vents right side
1. Turn temperature sensor 90 degrees and remove from the heater/air-conditioning unit.
2. Press latch on the electric connector for the sensor -arrow a- and pull off the connector.







Removing centre temperature sensor/side vents left side
1. Press latch on the electric connector for the sensor -4--arrows a- and pull off the connector.
2. Turn temperature sensor -4- 90 degrees and remove from the heater/air-conditioning unit.







Removing the temperature sensor footwell vent left side
1. Press latch on the electric connector for the sensor -5- and pull off the connector.
2. Turn temperature sensor -5- 90 degrees and remove from the heater/air-conditioning unit.







Temperature sensor for footwell outlet vent, right side
1. Turn temperature sensor by 90 degrees and pull it out of the heater housing.
2. Press latch on connector -arrows a- and pull off connector from the temperature sensor.







Installing temperature sensors/interior temperature sensors on heater

Installing the evaporator temperature sensor
1. Insert the electric connector into the sensor -1- until the connector is felt to engage.
2. Slide in the temperature sensor -1- into the heating/air-conditioning unit and turn 90 degrees.







Installing the intake air temperature sensor
1. Insert the electric connector into the sensor -2- until the connector is felt to engage.
2. Slide in the temperature sensor -2- into the heating/air-conditioning unit and turn 90 degrees.







Installing the centre temperature sensor/side vents right side
1. Insert the electric connector into the sensor -3- until the connector is felt to engage.
2. Slide in the temperature sensor -3- into the heating/air-conditioning unit and turn 90 degrees.







Installing the centre temperature sensor/side vents left side
1. Slide in the temperature sensor -4- into the heating/air-conditioning unit and turn 90 degrees.
2. Insert the electric connector into the sensor -4- until the connector is felt to engage.







Installing the temperature sensor footwell outlet vent left side
1. Slide in the temperature sensor -5 - into the heating/air-conditioning unit and turn 90 degrees.
2. Insert the electric connector into the sensor -5- until the connector is felt to engage.







Installing temperature sensor for footwell outlet vent, right side
1. Insert electric connector into the temperature sensor until it is felt to engage.
2. Slide in the temperature sensor into the heater and turn 90 degrees. Ensure it is seated properly.







Subsequent work

Touch up - evaporator temperature sensor
Install glove compartment.

Touch up - intake air temperature sensor
Install the cover under the right dashboard.

Touch up - centre temperature sensor/side vents right side
Install glove compartment.

Touch up - centre temperature sensor/side vents left side
Installing the servomotor for air conditioning.

Touch up - temperature sensor for footwell outlet vent, left side
Install servomotor.