Removing and Installing Sealing Ring For Selector Shaft

Removing and installing sealing ring for selector shaft
Tools





Preliminary work for sealing ring for right selector shaft
1. Remove multi-functional switch.

Preliminary work for sealing ring for left selector shaft
1. Remove engine guard .

Removing sealing ring for right selector shaft





1. Remove sealing ring with sharp tool, such as a scriber. -Graphic-


Removing sealing ring for left selector shaft





1. Remove retaining clip -A- on the holder. Selector lever cable to transmission





Selector lever cable to transmission

2. Unscrew fastening nut -B- on selector shaft and remove lever.





Removing left sealing ring

3. Push a sharp tool, e.g. scriber, into the sealing ring and remove it. -Arrows- .

Removing sealing ring for left selector shaft





Left transmission shield

1. Remove shield on the transmission. To do this, unscrew three fastening screws -Arrow-.





2. Remove tab washer -A- on the cable. Selector lever cable to transmission





Removing selector cable from transmission

3. Unscrew selector lever cable from the ball joint with universal disassembly tool NR.21.





Removing left sealing ring

4. Push a sharp tool, e.g. scriber, into the sealing ring and remove it. -Arrow-

Installing sealing ring for right selector shaft





sealing ring for selector shaft

1. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing. Installing

Installing sealing ring for left selector shaft





Positioning sealing ring

1. Position new sealing ring -Arrow-.





2. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing.-Arrow-
Driving in the sealing ring
3. Position selector lever on selector shaft and screw in fastening nut. Tightening torque 11 ft. lbs.





4. Attach tab washer -A- to the cable holder on the transmission side. Selector lever cable to transmission
5. Press cable on the ball joint -Arrow-.

Installing sealing ring for left selector shaft





Positioning sealing ring

1. Position new sealing ring -arrow-.





2. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing.-arrow-

Installing sealing ring
3. Position selector lever on selector shaft and screw in fastening nut. Tightening torque 11 ft. lbs.





4. Attach tab washer -A- to the cable holder on the transmission side. Selector lever cable to transmission
5. Press cable on the ball joint -arrow-.





Sheet metal panel screws

Note: When installing the shield, ensure that all fastening parts -figure are present and inserted correctly.





6. Install shield on the transmission. To do this, screw in three fastening screws -arrow-. Tightening torque 7.5 ft. lbs.

Left transmission shield

Subsequent work
Reworking for sealing ring for right selector shaft
1. Install multi-functional switch.

Reworking for sealing ring for left selector shaft
1. Fit engine guard.