Removing and Installing Torque Converter Sealing Ring
Removing and installing torque converter sealing ringTools
Preliminary work for sealing ring for torque converter
1. Remove transmission.
2. Remove torque converter.
Removing the torque-converter sealing ring
Torque Converter Overview:
1. Using the bolt adapter from the slide hammer kit 168, screw countersunk head bolt into sealing ring -direction of arrow-.
WARNING: Danger of scalding and chemical burns from hot ATF
^ Allow ATF to cool down
^ Wear personal protective gear (goggles, gloves)
2. Screw on slide hammer from slide hammer kit 168 and remove sealing ring.
Installing the torque-converter sealing ring
Torque Converter Overview:
1. Position new sealing ring on special tool assembly sleeve 3295.
2. Drive in sealing ring with special tool assembly sleeve 3295-arrow- until special tool touches transmission housing.
Subsequent work
Reworking sealing ring for torque converter
1. Install torque converter.
2. Install transmission.