Front Axle
Removing and installing sealing ring for output flangeTools
Preliminary work for output flange sealing ring
1. Remove four-wheel final drive.
Removing sealing ring for left and right output flange
Removing sealing ring for left-hand output flange
Overview Of Left Sealing Ring:
1. Remove flanged shaft with special tool striker vw 771/ 1 and shop-made tool.
2. Remove sealing ring with special tool striker vw 771 / 1 and extraction tool vw 771/ 37 attachment.
Removing sealing ring for right-hand output flange
Overview Of Right Sealing Ring:
1. Remove flanged shaft with special tool striker vw 771/ 1 and shop-made tool.
2. Remove sealing ring with special tool striker vw 771 / 1 and extraction tool vw 771/ 37 attachment.
Installing sealing ring for left and right output flange
Installing sealing ring for left-hand output flange
Overview Of Left Sealing Ring:
1. Drive in sealing ring with special tool pressure piece t10032.
2. Replace circlip on end of long flanged shaft.
3. Push flange shaft into transmission until it engages.
Installing sealing ring for right-hand output flange
Overview Of Rght Sealing Ring:
1. Drive in sealing ring with special tool pressure piece t10032.
2. Replace circlip on flanged shaft.
3. Push flanged shaft into transmission until it engages.
Subsequent work for output flange sealing ring
1. Install four-wheel final drive.
2. Check oil for four-wheel final drive.