Removing and Installing Spray Nozzle For Headlight Washing System

Removing And Installing Spray Nozzle For Headlight Washing System

Preliminary work
Removing front apron.

Removing spray nozzle

Removing spray nozzle for headlight washer system (basic model)







1. Press out nozzle head from the inside -arrow B- and retain it.







2. Disengage closure cap at the stops -arrows A-.
3. Disconnect water feed line from lifting cylinder using the rapid-action coupling -arrow A-.







4. Unscrew the top three fastening screws -arrows C-.







5. Unscrew the bottom fastening screw -arrow B-.







6. Pull lifting cylinder -arrow D- out at the top and disengage at the bottom.

Removing spray nozzle for headlight washer system (Turbo)







1. Press out nozzle head from the inside -arrow B- and retain it.







2. Disengage closure cap at the stops -arrows A-.
3. Disconnect water feed line from lifting cylinder using the rapid-action coupling -arrow A-.







4. Unscrew the top three fastening screws -arrows C-.







5. Unscrew the bottom fastening screws -arrows B-.







6. Remove lifting cylinder -arrow D-.

Installing spray nozzle

Installing spray nozzle for headlight washer system (basic model)
1. Engage lifting cylinder -arrow A- at the bottom and insert at the top.







2. Tighten the bottom fastening screw -arrow B-. Tightening torque: 1 ftlb.







3. Tighten the top three fastening screws -arrows C-. Tightening torque: 1 ftlb.







4. Connect rapid-action coupling for water line to lifting cylinder -arrow D-.
5. Press out nozzle head from the inside -arrow A- and retain it.







6. Fit cover -arrows B-.


Installing spray nozzle for headlight washer system (Turbo)
1. Position lifting cylinder -arrow A- in installation position.







2. Tighten the bottom fastening screws -arrows B-. Tightening torque: 1 ftlb.







3. Tighten the top three fastening screws -arrows C-. Tightening torque: 1 ftlb.







4. Connect rapid-action coupling for water line to lifting cylinder -arrow D-.
5. Press out nozzle head from the inside -arrow A- and retain it.







6. Fit cover -arrows B-.

Subsequent work
1. Install front apron.
2. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a left or right spray nozzle, or whether the water reservoir for the headlight washer was completely emptied or not, the bleeding process can require frequent activations of the spray nozzle.