Removing and Installing Wiper Arm For Rear Window Wiper System

Removing And Installing Wiper Arm For Rear Window Wiper System

Removing wiper arm for rear window wiper system

ATTENTION:
Danger of crushing and trapping when working on the rear window wiper system.
- Before removing wiper arm, remove ignition key and switch off steering column switch.

1. Unclip cover cap -1- at side and remove it.







2. Unscrew fastening nut -2-.
3. Pivot wiper arm -3- up and down a little and remove.

Installing wiper arm for rear window wiper system
1. Activate wiper motor once and drive to end position.
2. Fit wiper arm -3- and secure with fastening nut -2-. Tightening torque: 12 (9 ftlb.) Nm







NOTE: Before fitting the cap, check the retaining lugs of the cap for damage. The cap must be replaced in the event of damage or if you have any doubts about it.

3. Fit cover cap -1- and press in until it is felt to engage.