G7.1 - Phase III B - Spot Painting on Flat Surface

G 7.1 Phase III B - Spot Painting On Flat Surface

G 7.1.1 Procedure using Glasurit(R) HS 2C Topcoat solid 22 line

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.







Step 1a







Step 2







Step 3







Step 4







Step 5a

NOTE: For creeping clear lacquer application only.

1. Dilute clear lacquer with approx. 50% Glasurit(R) Blend-in Reducer 352-400.
2. Blend in spot-painting area with Glasurit(R) Blend-in Reducer 352-400.
3. Dry the area.
4. Dry the area again using an IR radiator.
5. Polish the area.

G 7.1.2 Procedure using Glasurit(R) Basecoat solid 55 line

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.







Step 1a







Step 2







Step 3







Step 4







Step 5a

NOTE: For creeping clear lacquer application only.

1. Dilute clear lacquer with approx. 50% blend-in reducer.
2. Blend in spot-painting area with blend-in reducer 352-400.
3. Dry the area.
4. Dry the area again using an IR radiator.
5. Polish the area.

G 7.1.3 Procedure using Glasurit(R) Basecoat metallic 55 line

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.







Step 1a







Step 2







Step 3







Step 4







Step 5







Step 6a

NOTE: For creeping clear lacquer application only.

1. Dilute clear lacquer with approx. 50% Glasurit(R) Blend-in Reducer 352-400.
2. Blend in spot-painting area with Glasurit(R) Blend-in Reducer 352-400.
3. Dry the area.
4. Dry the area again using an IR radiator.
5. Polish the area.

G 7.1.4 Procedure using Glasurit(R) Basecoat, water-based 90 line

WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.







Step 1a







Step 2







Step 3







Step 4







Step 5







Step 6a

NOTE: For creeping clear lacquer application only.

1. Dilute clear lacquer with approx. 50% Glasurit(R) Blend-in Reducer 352-400.
2. Blend in spot-painting area with Glasurit(R) Blend-in Reducer 352-400.
3. Dry the area.
4. Dry the area again using an IR radiator.
5. Polish the area.

G7.2 - Phase III C - Spot Painting Into Neighboring Section