S9.6 - F - Filler

S 9.6 F - Filler

S 9.6.1 Standox(R) 2K Universal Filler
S 9.6.1.1 Processing

S 9.6.1 Standox(R) 2K Universal Filler







WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.

Description:
- Universal 2K MS sanding filler

Properties:
- Short drying times
- Excellent filling properties
- Easy to sand
- Chromate-free

Base surfaces:
- Hardened paintwork, sanded
- Polyester products, sanded
- Cleaned sheet steel, sanded
- Factory primer and KTL, sanded
- Aluminum and galvanized base surfaces must be pre-primed with Standox(R) Etching Adhesion Primer
- Please note base surface pre-treatment instructions:
-> S 5.1
-> S 9.2.2

NOTE:
- Raw material base: Acrylic polyurethane, corrosion inhibition pigments
- Flash point: 26° C/78.8° F
- Spec. weight: 1.41 g/cm3
- Solid content: 61.3% weight/38.8% vol.
- Theoretical yield: 7.5 m2/ltr. with a dry coat thickness of 50 microns
- Theoretical yield: 4.2 m2/ltr. with a dry coat thickness of 90 microns
- Clean equipment after use with cleaning thinner

VOC value:
- 545 g/l

WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.

S 9.6.1.1 Processing







S9.7 - D - Topcoat