Operation CHARM: Car repair manuals for everyone.

Carpet: Service and Repair



704119 Removing And Installing Floor Covering

Preliminary work
1. Remove front seat at right and left.
2. Remove rear side trim panel at left and right.
3. Remove inner door sill trim on the right and left.
4. Remove front side-section trim panel (driver's side).
5. Remove footrest.
6. Remove accelerator pedal.
7. Remove gearshift bracket.
8. Remove parking-brake lever.

Removing floor covering






1. Detach floor covering -1- in the area around the bottom of the A-pillar (passenger's side) -Arrow A-.






2. Detach Velcro fasteners around the centre tunnel.






3. Fold together floor covering -1- in the sequence shown, -A, B, C-, and remove from the vehicle.






Installing floor covering
1. Insert floor covering -1- in the vehicle and align in the sequence shown, -A, B, C-.






2. Secure Velcro fasteners around the centre tunnel.






3. Secure floor covering -1- in the area around the bottom of the A-pillar (passenger's side) -Arrow A-.






Subsequent work
1. Install parking-brake lever.
2. Installing gearshift bracket.
3. Install accelerator pedal.
4. Install footrest.
5. Install front side trim panel (driver's side).
6. Install inner door sill trim on the right and left.
7. Install rear side trim panel at left and right.
8. Install front seat at right and left.