Removing and Installing B-Pillar Trim

706719 Removing And Installing B-pillar Trim

Removing B-pillar trim

Removing B-pillar trim panel

Installation location of B-pillar trim panel:

Unclipping coat hook bracket:

1. Lift up coat hook bracket -1- from below with a plastic spatula -arrow- and carefully pull up and off.

Pressing out seat belt height adjuster actuator:

2. Press seat belt height adjuster actuator -1- out of the fastening screw using a screwdriver.

Removing B-pillar trim panel:

3. Unscrew fastening screw -1- from sash guide mount -2-.
4. Unscrew fastening screw -3-. Lift B-pillar trim -4- up and out.

Installing B-pillar trim

Installing B-pillar trim panel

Installation location of B-pillar trim panel:

Installing B-pillar trim panel:

1. Push grommet -5- onto lug of the B-pillar trim panel -4- and insert in bottom of the B-pillar.
2. Screw down B-pillar trim panel -4- with fastening screw -3-.
3. Position sash-guide mount -2- on the B-pillar and tighten with fastening screw -1-. Tightening torque Tightening torque 37 ftlb.

Installing seat belt height adjuster actuator:

4. Press peg of the seat beat height adjuster actuator -1- into the bore of the fastening screw.

Installing coat hook bracket:

5. Check sheetmetal clips -2-, replacing if necessary.
6. Carefully press coat hook bracket -1- into the sheetmetal clips -2- at the bottom of the B-pillar trim panel.