Sunroof / Moonroof Switch: Service and Repair

601219 Removing And Installing Switch For Sliding Roof

Removing switch for sliding roof

Removing cover for motor for sliding roof
1. Switch off ignition and remove ignition key.

Unclipping cover for fastening screws:

2. Using a small screwdriver, carefully unclip and remove the cover for the fastening screws at the openings -arrows- provided.
3. Unscrew the two fastening screws.

Unclipping cover for motor for sliding roof:

4. Unclip cover for motor for sliding roof at the rear to the left and right -arrows A- and push it out to the front towards the windscreen -arrow B-.

Removing connectors at sliding roof switch and interior light:

5. Release connecters at sliding roof switch and at the interior light -arrows A- and remove them. Remove cover for motor for sliding roof.

Removing switch for sliding roof

Removing switch for sliding roof:

1. Release the four locking tabs on the cover of the motor for sliding roof -arrows A- and remove the switch for sliding roof.

Installing switch for sliding roof

Installing switch for sliding roof:

1. Press switch for sliding roof into the cover of the motor for sliding roof until the four locking tabs -arrows- are felt to engage.