Procedures
Eliminating Noise Symptoms - Reworking Convertible Top Frame
General information
Symptoms
Creaking/rattling noises from around the convertible top frame.
Causes and remedial action
Creaking/rattling noises can be heard while driving due to tolerances between roof frame 1, roof frame 2 and roof frame 3.
In the event of a complaint, this problem must be remedied by greasing or replacing the bearing sleeves.
Tools and materials
000.043.206.65 Krytox -] GREASE
997.561.909.00 Repair kit -] REPAIR KIT
Reworking convertible top frame
1. Remedial action 1
Only for vehicles with white bearing sleeves.
1.1. Switch on ignition.
1.2. Open the convertible top to service position.
1.3. Switch off ignition and remove key.
1.4. Grease bearing sleeves for roof frame 1 to roof frame 2 with -Krytox-.
1.5. Grease bearing sleeves for roof frame 2 to roof frame 3 with -Krytox-.
1.6. Move convertible top back to its original position.
2. Remedial action 2
If customers still complain of noises even after carrying out remedial action 1, the bearing sleeves must be replaced.
2.1. Replace bearing sleeves. Refer to Replacing convertible top frame