Removing and Installing Selector Support

WM 370819 Removing and installing selector support





Preliminary work

Preliminary work
1. Remove selector knob.
2. Remove center console.

Removing selector support

Removing selector frame
1. Move selector lever to position P.
2. Open bayonet lock.





3. Detach adjustment pins.





4. Unclip support bracket at selector frame.





5. Disconnect electric plug on selector frame.





6. Undo the nuts and lift selector frame up and out.





Installing selector support

Installing selector frame

Note
Before starting to install the selector frame, ensure that the transmission and selector frame are in parking position.

1. Fit selector frame and screw in nuts.








2. Insert electric plug on selector frame.





3. Clip in support bracket at selector frame.





4. Engage adjustment pins.





5. Close bayonet lock.





Subsequent work

Subsequent work
1. Install center console.
2. Install selector knob.