Removing and Installing Front Upper Part of Lid Lock

Removing And Installing Front Upper Part Of Lid Lock

Technical values







Removing front upper part of lid lock

Removing upper part of front lid lock







INFORMATION:
- Determine the installation position of upper part of lid lock to cover using marking and note down.
- Fastening nuts must not be used again following removal.

1. Unscrew -1- fastening screws and remove upper part of lid lock -2-.







Installing front upper part of lid lock

Installing upper part of front lid lock







1. Position upper part of front lid lock -2- and tighten the fastening screws -1- slightly.







2. Adjust the upper part of lid lock -2- in relation to the lid according to the noted position; determine gap to right, if necessary.
3. Tighten fastening screws -1-. Tightening torque: 9.7 Nm (7.0 ftlb.)
4. Check lid function.

Checking lid functions

1. Close the front lid and lock it.
2. Check that the front lid is held down by the safety hook (locking hook) after the lid lock has been opened.
3. Check return spring on lower part of lock pulls back the safety hook as far as the stop when lid is open.