681519 Removing And Installing Glove Compartment

Removing And Installing Glove Compartment

Technical values







Preliminary work

1. Remove right instrument panel cover. Refer to Removing and installing instrument panel cover.
2. Remove trim under instrument panel at front passenger's side. Refer to Removing and installing trim under instrument panel.
3. Remove right footwell light. Refer to Removing and installing footwell light.
4. Remove cover (cold air bulkhead). Refer to Removing and installing cover.
5. Remove right centre console cover. Refer to Removing and installing centre console cover.
6. Remove cup holder. Refer to Removing and installing cup holder.

Removing glove compartment







1. Unscrew right fastening screws -2- from the glove compartment -1-.







2. Pull electrical lead out of glove compartment -arrow-.
3. Unscrew left fastening screws -2- from the glove compartment -1-.







4. Unscrew top fastening screws -2- from the glove compartment -1-.







5. Carefully pull out glove compartment -1- (-arrow-) until the electrical plug connection can be removed.
6. Pull off electrical plug connection -2- (-arrow-) and remove glove compartment -1- to the rear.







Installing glove compartment







1. Swivel in glove compartment -1- at the bottom until the electrical plug connection -2- can be connected.







2. Plug in electrical plug connection -2- (-arrow-).
3. Swivel glove compartment -1- into the instrument panel -arrow- and secure with the top fastening screws -2-. Tightening torque: Final tightening: 2 ftlb.







4. Screw right fastening screws -2- into the glove compartment -1-. Tightening torque: Final tightening: 2 ftlb







5. Attach electrical wire to glove compartment -arrow-.
6. Screw left fastening screws -2- into the glove compartment -1-. Tightening torque: Final tightening: 2 ftlb.







Subsequent work

1. Install cup holder. Refer to Removing and installing cup holder.
2. Install right centre console cover. Refer to Removing and installing centre console cover.
3. Install cover (cold air bulkhead). Refer to Removing and installing cover.
4. Install right footwell light. Refer to Removing and installing footwell light.
5. Install trim under instrument panel at front passenger's side. Refer to Removing and installing trim under instrument panel.
6. Install right instrument panel cover. Refer to Removing and installing instrument panel cover.