Removing and Installing B-Pillar Trim

Removing And Installing B-Pillar Trim

Technical values







Removing B-pillar trim

Removing B-pillar trim panel







1. Lift up coat hook bracket -1- from below with a plastic spatula -arrow- and carefully pull up and off.







2. Press seat belt height adjuster actuator -1- out of the fastening screw using a screwdriver.







3. Unscrew fastening screw -1- from sash guide mount -2-.







4. Unscrew fastening screw -3-. Lift B-pillar trim -4- up and out.

Installing B-pillar trim

Installing B-pillar trim panel







1. Push grommet -5- onto lug of the B-pillar trim panel -4- and insert in bottom of the B-pillar.







2. Screw down B-pillar trim panel -4- with fastening screw -3-.
3. Position sash-guide mount -2- on the B-pillar and tighten with fastening screw -1-. Tightening torque: 37 ftlb.
4. Press peg of the seat beat height adjuster actuator -1- into the bore of the fastening screw.







5. Check sheetmetal clips -2-, replacing if necessary.







6. Carefully press coat hook bracket -1- into the sheetmetal clips -2- at the bottom of the B-pillar trim panel.