Hazard Warning Switch: Service and Repair

Removing And Installing Hazard Warning Light Switch

Removing hazard warning light switch

INFORMATION: The hazard warning light switch is located in the middle air vent.












1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent out of the dashboard.







2. Pull apart the electrical plug connections and remove the air vent.
3. Unclip and remove hazard warning light switch from the air vent.

Installing hazard warning light switch
1. Position hazard warning light switch and press it into the air vent.







2. Push together the electrical plug connections.
3. Observe the line routing and insert the air vent into the dashboard until it clicks into place.
4. Check function of air vent illumination, air vent adjustment and the hazard warning light switch.