Trunk Light Bulb: Service and Repair

Removing And Installing Bulb For Luggage Compartment Light

Removing bulb for luggage compartment light

Removing luggage compartment light

CAUTION:
Danger of damage to property if bulbs are used or handled incorrectly.
- Risk of damage to bulbs and bulb housing.
- Switch off ignition and remove ignition key.
- To prevent short circuits, the load in question must be switched off while changing bulbs.
- Only bulbs specified in the bulb table may be used.
- Bulbs with a higher wattage may damage the bulb housing.
- New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
- In certain states, it is compulsory to carry spare light bulbs.












1. Press luggage compartment light carefully out of the luggage compartment trim at the cutout -arrow- using a screwdriver.
2. Pull off plug on luggage compartment light and remove luggage compartment light.

Removing bulb for light







1. Remove defective bulb from between the contact springs.

Installing bulb for luggage compartment light

Installing bulb for light

INFORMATION: Only use the relevant bulb specified in the bulb table







1. Insert new bulb into the contact springs.

Installing luggage compartment light












1. Attach plug on luggage compartment light.
2. Press luggage compartment light into the luggage compartment lining.