Sunroof / Moonroof Switch: Service and Repair

Removing And Installing Switch For Sliding Roof

Removing switch for sliding roof

Removing cover for motor for sliding roof

1. Switch off ignition and remove ignition key.
2. Using a small screwdriver, carefully unclip and remove the cover for the fastening screws at the openings -arrows- provided.







3. Unscrew the two fastening screws.







4. Unclip cover for motor for sliding roof at the rear to the left and right -arrows A- and push it out to the front towards the windscreen -arrow B-.
5. Release connecters at sliding roof switch and at the interior light -arrows a- and remove them. Remove cover for motor for sliding roof.







Removing switch for sliding roof

1. Release the four locking tabs on the cover of the motor for sliding roof -arrows a- and remove the switch for sliding roof.







Installing switch for sliding roof

1. Press switch for sliding roof into the cover of the motor for sliding roof until the four locking tabs -arrows- are felt to engage.







Installing cover for sunroof motor

1. Position cover for sunroof motor. Plug in the connectors on the interior light and the sunroof switch until they are felt to engage.







2. Using the clips, engage cover for sunroof motor on roof frame -arrow A-, push back towards sunroof -arrow B- and clip in at the rear to the left and right -arrows C-.







3. Insert cover of fastening screws into the mounts on the sunroof motor cover -arrows- and clip it in.







4. Switch on ignition and check that sunroof switch and interior light are working.