91601900 Removing and installing CD changer

WM 916019 Removing and installing CD changer

Technical values





Preliminary work

Preliminary work - removing CD changer

=> Removing and installing luggage compartment cover - removing

Removing CD changer





Install location





1. Push both retaining clips -A- back.





Retaining clips

2. Jerk the CD changer with its retaining bracket forward.





Removal

CAUTION

Voltage peaks can damage the audio system.

-> Before unplugging/removing audio components, remove ignition key and switch off audio system.

3. Release the electrical connectors and unplug them.





Electrical connectors

4. Unscrew the 6 fastening screws -6- and pull the CD changer out of its retaining bracket.





Fastening screws

Removing the US version of the CD changer.





Install location





1. Unscrew the 6 fastening screws -1- and pull the CD changer out of its retaining bracket.





Fastening screws

CAUTION

Voltage peaks can damage the audio system.

-> Before unplugging/removing audio components, remove ignition key and switch off audio system.

2. Release the electrical connectors -4, 5- and unplug them.





Electrical connectors

3. Undo the two fastening screws -2-.





Removing holder for CD changer

4. Pull out holder for CD changer -1- toward the front from both fastening parts -4- and take off.

Installing CD changer

Information

If a new CD changer is installed, the adjusting screw must be in position H.





CD changer adjusting screw position

1. Replace retaining clips for CD changer retaining frame.





Retaining clips

2. Insert the CD changer into its retaining frame and screw down tight with the six fastening screws -6-. => Tightening torque: 2.5 Nm (2 ftlb.)





Fastening screws

3. Insert electric connectors into the audio components until they are felt to engage.





Electric connectors

4. Position the support with the CD changer already attached on the body and move it backwards until the support clicks into place.





Installation

5. Check whether the clips have engaged in the body by pulling the CD changer.

Installing the US version of the CD changer.

Information

If a new CD changer is installed, the adjusting screw must be in position H.





CD changer adjusting screw position

1. Check both sheetmetal clips -3- and both fastening parts -4- , replace if necessary.





Installing holder for CD changer

2. Press in holder for CD changer -1- with both fastening parts -4- to the body and tighten both fastening screws. => Tightening torque: 6.5 Nm (5 ftlb.)
3. Plug the electrical connectors -4, 5- into the CD changer until they are felt to engage.





Electrical plug

4. Insert the CD changer into its retaining frame and screw down tight with six fastening screws -1-. => Tightening torque: 2.5 Nm (2.0 ftlb.)





Fastening screw

Subsequent work

Subsequent work - CD changer

=> Removing and installing luggage compartment cover - installing