947119 Removing and installing auxiliary headlight

WM 947119 Removing and installing auxiliary headlight

Removing auxiliary headlight





Main illustration

1. Lift up cover for auxiliary headlight from below and unclip it from the front apron.





Unclipping cover for auxiliary headlight

2. Unscrew the three fastening screws -1- and remove the headlights from the front apron.





Unscrewing fastening screws

3. Release the electric connector from the fog-light bulb -1- -A- and disconnect it, turn the holder for the parking light -2- (bayonet lock) and remove from the headlight.





Screwing down auxiliary headlight

Installing auxiliary headlight

1. Insert parking light holder in the auxiliary headlight and lock it (bayonet lock). Push electric connector onto fog-light bulb until it clicks into place.
2. Position the auxiliary headlight in the front apron and secure it with the three fastening screws.





Tightening auxiliary headlight

3. First, insert cover laterally -A- , then -B- in the front apron and clip it in.





Clipping in cover for auxiliary headlight

Subsequent work

Subsequent work for auxiliary headlight

Information

On installing a new auxiliary headlight, the adjustment must be checked with a headlight adjustment unit and adjusted if necessary.

Using a Torx socket wrench (size 30), adjust the auxiliary headlight through the cover on the adjusting screw -2-.





Tightening auxiliary headlight