370819 Removing and installing selector support

WM 370819 Removing and installing selector support

Technical values





Preliminary work

1. Remove selector knob. -> 370419 Removing and installing selector knob - section on "removing" 370419 Removing and installing selector knob
2. Remove centre console. -> 681719 Removing and installing centre console - section on "removing" 681719 Removing and installing centre console

Removing selector support

Removing selector frame

1. Move selector lever to position P.
2. Open bayonet lock.





Opening bayonet lock

3. Detach adjustment pins.





Disengaging the selector cable

4. Unclip support bracket at selector frame.





Unclipping support bracket

5. Disconnect electric plug on selector frame.





Removing electric plug

6. Undo the nuts and lift selector frame up and out.





Removing selector frame

Installing selector support

Installing selector frame

Information

Before starting to install the selector support, ensure that the transmission and selector support are in position "P".

1. Fit selector frame and screw in nuts.





Installing selector frame





2. Insert electric plug on selector frame.





Fitting electric plug

3. Clip in support bracket at selector frame.





Clipping in support bracket

4. Engage adjustment pins.





Engaging selector cable

5. Close bayonet lock.





Closing bayonet lock

Subsequent work

Reworking

1. Install centre console. -> 681719 Removing and installing centre console - section on "installing" 681719 Removing and installing centre console
2. Install selector knob. -> 370419 Removing and installing selector knob - section on "Installing" 370419 Removing and installing selector knob