Removing and Installing Gearshift Bracket

WM 340819 Removing and installing gearshift bracket








Preliminary work

Preliminary work
1. Remove shift lever knob.
2. Remove center console.

Removing gearshift bracket

Removing gearshift bracket
1. Locking bridge P 9619/1 must be fitted on the gearshift bracket.





2. Open bayonet locks on the pre-selector and shifting connections.





3. Disengage adjustment pin on pre-selector and shifting connections.





4. Unclip supports on the gearshift bracket.





5. Unscrew nut and lift gearshift bracket up and off.





6. Remove locking bridge.





Installing gearshift bracket

Installing gearshift bracket
1. Fit gearshift bracket and screw in nuts.








2. Locking bridge P 9619/1 must be fitted on the gearshift bracket.





3. Clip in supports on the gearshift bracket. The support with the blue hinged tube must be fitted on the left and the support with the black hinged tube must be fitted on the right.





Note:
Before starting to install the gearshift bracket, ensure that the transmission is in neutral.

4. Engage adjustment pin on pre-selector and shift connections.





5. Close bayonet locks on the pre-selector and shift connections.





6. Locking bridge 9619 must be removed.





Removing locking bridge

Subsequent work

Subsequent work
1. Install center console.
2. Install shift lever knob.