Connecting Rod Bearing

1. Position the new connecting rod bolts with the associated connecting rod caps and tighten the screws by hand.
2. Pre-tighten connecting rod bolts to the specified torque and retighten with a torque angle wrench. -> Initial tightening: 15 ftlb.; -> Torque angle: 110°
3. Unscrew connecting-rod bolts.
4. Pre-tighten connecting rod bolts to the specified torque and perform the final tightening with a torque angle wrench. -> Initial tightening: 15 ftlb.; -> Final tightening - torque angle: 110°