Wheel Stud / Lug Nut

Front Axle
Threaded connection, wheel to wheel hub M14 X 1.5 Tightening torque 130 Nm (96 ftlb.)
Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening.

Note: Do not grease threaded connection in Dacromet finish - aluminum color! Thinly grease thread, shank and under head (between screw head bearing surface and spherical cap ring) of the wheel bolts with Optimoly TA (aluminum paste). Do Not grease bearing surface of the spherical cap facing the wheel. If heavily contaminated, clean bolts first with a lint-free cloth. Replace damaged wheel bolts (no rework permitted).

Rear Axle
Wheel to wheel hub M14 X 1.5 Tightening torque 130 Nm 96 ftlb.
Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening.

Note: Thinly grease thread, shank and under head (between screw head bearing surface and spherical cap ring) of the wheel bolts with Optimoly TA (aluminum paste). Do not grease bearing surface of the spherical cap facing wheel. If heavily contaminated, clean bolts first with a lint-free cloth.